If you need help with setting up SmartWeb from the start, follow this guide step-by-step.

Otherwise you can use the quick-links below, for a guide on certain parts.

Connect your SmartWeb
Adding a shipper
Adding a shipping rate

 


1. Connect your SmartWeb with Webshipr


Start by creating a Webshipr account on Webshipr.com or Webshipr.dk

When logging in for the first time, you will be met with the following 4 steps:

shopify1

Click on “Create your first order system” to add your SmartWeb to Webshipr.

Before connecting your oder system, you must enable API access in your smartweb control panel.

Control panel –> API –> Check-mark API access.

Choose “SmartWeb” in the “Order system type” dropdown, followed by an URL for your webshop.

Ex. Mywebshopname.com

Fill out the informations in “Sender address”. This is the address, from where you’re shipping orders.

When everything is done and correctly filled, press “Create order system”.

 


2. Add a shipper


Next we need to create your shipping methods.

Go back to “Get started” and click on “Create your first carrier now”.

Here you will have the opportunity to choose amongst our current integrations.

When clicking “Create now”, you will be asked to fill out the information we need from your shipper.

shopify6

For the purpose of this guide, I’ve chosen YourGLS as an example.

The needed information differ from shipper to shipper.

 

Great! Now we’re almost there.

All we have left to do is add our shipping rates.


3. Add a shipping rate


Click on “Create your first shipping rate”.

shopify7

Depending on your chosen shipper, “Type” and “Carrier service” will vary.

Note!

When using SmartWeb with Webshipr, you’ll need to create your shipping rates in both systems.

When identical rates are set up, you can match/sync them on their ID.

Type in the SmartWeb rate ID in the field shown below

smartWeb1

 

If you wish to allow your customers to choose a pickup point themselves, select the following:

  1. “GLS Pakkeshop” for GLS
  2. “Enable drop points” for PostDK
  3. “Pickup point” for Bring
  4. “Droppoints” for UPS

Fill out the remaining informations, aswell as the destination countries that you wish to support.

 

Amazing. Now you’re up and running and ready to ship!